Cleaning And Maintenance - MPM MOD-27 Bedienungsanleitung

using (switch it to the brush mode), a row of rigid bristles will appear on the bottom to facili-
tate cleaning hard floors.
SLIT ATTACHMENT WITH MOVABLE BRUSH
Used for cleaning difficult to access areas, such as in room corners, by and below pieces of
furniture and in bends and slits. It is also perfect for cleaning computer keyboards, drawers,
radiators or window frames.
REPLACING THE DUST BAG
To replace the dust bag, disconnect the appliance from the power supply, detach the suc-
tion hose (18), press the button (6) to open the upper cover (5), slide out the dust bag, while
holding the flange with the inlet opening directed upwards. Install new dust bag. You can
purchase spare dust bags.
AIR FILTER CLEANING AND REPLACEMENT
Normal use of the vacuum cleaner requires periodical replacement or cleaning of the air filter,
which protects the motor from the side of the dust bag, and the air outlet filter. For this purpo-
se, disconnect the appliance from the power supply and detach the suction pipe.
1. Release the latch in the cover (10), remove the cover and then remove the filters (11), (12), (13).
2. Remove the motor filter (22). You will access the filter by lifting the cover (5) and removing the
dust bag (14). Remove the filter element (22).
3. Clean the HEPA filter element (12) of dust. The HEPA filter element must be perfectly dry be-
fore installing it again. Before closing the cover (10), make sure that the HEPA filter element is
aligned. Do not wash the HEPA filter element.
4. Wash filter cartridges (11), (13), (22) under running and cool water. Dry the filters thoroughly
after washing.
5. Cartridges should be cleaned every month or more frequently (depending on the usage). If a
cartridge is too contaminated or damaged, replace it with a new one.
6. When installing the filter elements, carefully align them in the housing and the vacuum
cleaner.
CAUTION: The filter cartridge being mounted must be completely dry. Mounting a wet filter may cause an
electric shock.

CLEANING AND MAINTENANCE

1. Periodically clean the vacuum cleaner housing and other external elements with a damp
cloth. This will allow maintaining good appearance of the appliance.
2. For this purpose, do not use sharp objects or any strong detergents (e.g. solvents), as this will
cause permanent damage to the vacuum cleaner housing.
3. For air filters and dust bag, follow the above instructions.
13