Herunterladen Inhalt Inhalt Diese Seite drucken

Emptying The Dust Canister; Cleaning And Maintenance - MPM MOD-34 Bedienungsanleitung

Vertikaler beutelloser staubsauger
Vorschau ausblenden Andere Handbücher für MOD-34:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

EMPTYING THE DUST CANISTER

1. Turn off the vacuum cleaner with the power switch ② and unplug the power cord from the
mains.
2. Hold the motor unit ① with the dust canister ④ directly
above the trash can
3. Press the hinged cover release ⑥ to swing open the cover
⑤ , then shake out all dust.
4. Close and lock the hinged cover ⑤ .
PARKING THE VACUUM CLEANER IN THE WALL MOUNT
The MOD-34 vacuum cleaner includes a wall parking
mount ⑯ for easy and space-saving storage. Install the wall
parking mount on a wall to use it:
1. Choose a place on a wall high enough above the floor so
that the vacuum cleaner fits parked and with its telescopic
wand and floor tool attached. Make sure there is no wiring
in the wall within the envelope of the wall parking mount.
2. Place the wall parking mount ⑯ to the selected location on
the wall and mark the holes to drill with the pencil. Drill the
holes at the market locations to fit the plugs. Next, drive in
the plugs flush and attach the wall parking mount with the
screws ⑰ included with the product —
3. Now, you can park and store the vacuum cleaner on the
mount
.
Fig. 4

CLEANING AND MAINTENANCE

1. Clean the outer surface of the vacuum cleaner, the interior
of the dust canister and the accessories (tools) with a damp
cloth. Next, wipe them dry. Use a mild detergent to remove
persistent dirt.
2. Empty the dust canister every time you finish vacuum clean-
ing. Clean the EPA ⑦ and the filter cage ⑧ (which is also a
coarse filter) every few times you empty the dust canister. See
the assembly and disassembly of the filter in "ASSEMBLY AND
DISASSEMBLY". Wash the filter cage ⑧ in water and leave to
dry. The EPA filter ⑦ must be cleaned gently on the outside,
with a soft brush.
CAUTION! Do not clean the EPA filter ⑦ wet!
3. Periodically clean the exhaust filter ⑩. It is accessed by re-
moving the exhaust filter cover ⑪. Open the exhaust filter
cover by turning it a bit counter-clockwise. Remove the ex-
haust filter ⑩, flush it clean with water, and leave until thor-
Fig. 2
.
Fig. 3
.
11

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis