Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CLEANING AND MAINTENANCE
1. Periodically wipe clean the vacuum cleaner canister, the cyclone chamber and the dust can-
ister with a damp cloth. This will keep a neat appearance for a long time.
2. Do not clean with sharp objects or strong detergents (e.g. solvents), as they will cause perma-
nent damage to the vacuum cleaner canister.
3. Maintain the air filters as explained above.
TROUBLESHOOTING
Problem:
The cyclone chamber with the dust
canister cannot be placed in their seat.
Vacuum cleaner canister overheating.
Low suction power.
TECHNICAL DATA
Technical parameters are indicated on the product nameplate.
Length of power cord: 6 m
Reach of vacuum cleaner: 9 m
Note! MPM agd S.A. reserves its right to modify the technical data.
PROPER DISPOSAL OF THE PRODUCT
This symbol on the product indicates that the product, after its lifetime, should not be disposed with other
Poland
household wastes. To avoid harmful influence on the environment and human health due to uncontrolled
waste disposal, dispose the waste device to the service point of waste household appliances or report
collecting it from home. In order to obtain detailed information about the location and how to dispose
the waste electrical and electronic equipment in a safe way, contact your retailer or local Department of
Environmental Protection. Do not dispose the device with other municipal waste
14
Possible causes:
The motor filters were not properly
installed.
A slight increase in the temperature of the vacuum cleaner canister is normal. If the
temperature is rising considerably, immediately turn off the vacuum cleaner and wait
until cools.
The air filters are very dirty.
The dust canister is full.
The suction hose and/or the telescopic
wand is clogged.
(waste electrical and electronic equipment)
Solution:
Install the motor filters properly.
Clean or replace the filters.
Empty the dust canister.
Unclog the suction hose and/or the
telescopic wand.
Werbung
Inhaltsverzeichnis
