eta MEZO Bedienungsanleitung Seite 32

GB
– After finishing work and before cleaning, always switch off the appliance and disconnect it
from power supply by taking the power cord connector out of the electric socket.
– Always use only one function of the appliance, never turn on several functions at the same
time (e.g. processing food in the bowl B1 and at the same time in the meat mout A4).
– The product is intended for home use and similar (in shops, offices and similar
workplaces, in hotels, motels and other residential environments, in facilities
providing accommodation with breakfast). It is not intended for commercial use!
– CAUTION: Do not use the appliance with a program, time switch or any other part that
turns the appliance on automatically as there is a risk of fire if the appliance is not covered
or placed properly.
– The appliance must not be used in damp or wet environment and in any environment with
the danger of fire or explosion (spaces where chemicals, fuels, oils, gases, paints and
other flammable or volatile materials are stored).
– Never submerge the appliance under water and do not wash under running water!
– Do not leave the appliance in operation without supervision and supervise it for the entire
time that food is being prepared!
– Due to the size of the working bowl please take into account, that the appliance cannot whip/
knead enough a very small amount of ingredients. For optimal result, choose ingredients of
total amount min. 300 g.
– When using the kneading hook, run the drive unit at speed 3 maximum.
– Use the appliance only in the working position in places, where there is no risk of it being
knocked over and at a sufficient distance from sources of heat (e.g. fire stoves, electric/
gas stoves, cookers, etc.), and wet surfaces (kitchen sinks, wash basins etc.).
– When mixing or blending liquids, never use a greater volume than is recommended.
– Never insert your fingers into the filling opening and do not use a fork, knife, spatula,
spoon, etc.
– The maximum time of processing is 10 minutes. Then wait for 30 minutes, which is necessary
for the drive unit to cool down.
– Due to safety it is not possible to change the attachments while the drive unit is in operation.
– If the funnel is empty, do not leave the extra attachment running.
– Never use the extra attachment if it is not working properly, if it fell to the ground and got
damaged. In such cases take the extra attachment to a specialized service to check its
safety and proper function.
– When assembling the extra attachment, follow the instructions for use carefully. In order to
ensure proper functioning, any other way of assembling the extra attachment is not permissible!
– The assembled extra attachment can be attached and removed only when the drive unit is
switched off and the power cord is unplugged from the power socket.
– Make sure hair and loose pieces of clothing do not get into the attachments or into the
rotating drive to avoid risk of them tangling up in the mixing blade or the rotating drive itself.
– Before removing the extra attachment from the drive unit, allow the rotating parts to stop
completely.
– Do not fill the container with water or other liquid to maximum. When in operation, the
water could overflow and get into the appliance.
– Make sure that the power cord does not come into contact with the rotating part of the
appliance.
– Do not wind the power cord around the appliance; this will extend its life.
– The power cord must not be damaged by sharp or hot objects, by an open flame and
it must not be submerged under water.
32 / 79