Extraordinary Maintenance - Rizzoli RT Serie Gebrauchsanweisung

5.10 MAINTENANCE OF THE LIGHT
WARNING! Before starting any maintenance operation for the light, you
must disconnect it from AC power and be sure that the thermal cooker is not
powered. Verify also if the thermal cooker is cold and if the light was turned
on in the previous minutes.
Oven lamp suffers high temperatures. Even
if it is designed to work in these conditions,
it could become out of order. You have
to replace it with a lamp with the same
features (halogen lamp 25W 230V 300°
connection G9). To replace the lamp you
have to unscrew the lamp cover, remove the
Picture 35 - Take-down the oven lamp
5.11 THERMAL EXPANSION
During the use, all the materials of the
thermal cooker are subjected to expansion
and little movements due to the variation of
temperature. This must not be prevented,
otherwise deformations
5.12

EXTRAORDINARY MAINTENANCE

Most of the thermal cooker's parts are
easy to remove with a simple screwdriver,
eventual repairs or modifies will be faster if
the concerned piece, directly or by a dealer
is sent to our factory. If you need accessories
or spare parts, please tell us the the serial
lamp, insert the new lamp and finally screw
in the lamp cover. Seldom, it is necessary to
clean the glass of the lamp cover. To make
this, you have to unscrew the lamp cover,
remove the external residuals due to the
cooking steams, wash the lamp cover and
once it is dry you can screw it in its place.
might happen. For this reason, the spaces
which allow the expansion inside and
outside the thermal cooker must be kept
free and clean.
and breakings
number of the thermal cooker indicated
in the green booklet given together with
the wood fired thermal cooker. The serial
number is also indicated on a plate placed
on the side of the wood box.
97