Heating Phase; Steam Dispensing - La Cimbali M32 Dosatron Handbuch

English
While the machine is heating up, the display will show:
- If you press one of the coffee dispensing buttons, the dispensed coffee
will be at the temperature reached at that point.
- If you press one of the selection buttons - Milk, Cappuccino or Water -
none will be dispensed because the reached working pressure is still
too low.
While waiting for the machine to heat up, insert all the filter-holders.
When the programmed machine working pressure and temperature are
reached:
- the pressure gage needle will stabilize in sector A;
- the display will show the day of the week and the current time.
Now press a selection button on each panel to harmonize the temperature
between the dispensing units and filter-holders.
As a rule, while the machine is heating up, a small amount of steam will
issue from the pressure-relief valve.
Unhook filter holder and empty the coffee grounds of the previous coffee
in the dregs drawer.
Fill the filter with one dose of ground coffee in the case of the 1-cup
filterholder with conical filter or with two doses of ground coffee in the
case of a 2-cup filterholder with cylindrical filter.
Uniformly press the ground coffee in the filter holder by means of the
pressing disc of the grinder.
Clean the filter rim in order to eliminate the eventual ground coffee.
Hook filterholder to the group and put one or two cups underneath of the
delivery spouts of filter holder.
Push the button corresponding to the wanted coffee.
The delivery can be interrupted in whichever moment by means of the
push button STOP.
The machine has two steam systems with a steam spout for each one.
1) One system has a knob control that permits the gradual delivery of
steam, which is required for making emulsified beverages.
2) The other system has a button control for making beverages that
have to be heated quickly.
When heating a beverage, insert the steam spout into the beverage and
then press the button or turn the knob (depending on the system used).
When finished, turn off the steam.
Note: At the conclusion of each steam dispensing phase,
clean the inside of the steam nozzle as follows:
Turn the nozzle towards the cup tray and carefully
activate steam dispensing at least once.

Heating phase

Machine Cold
Please Wait
Delivery of the cofee

Steam dispensing

A
2
1
English