Safety Instructions; Intended Use; Safety Signs And Symbols; Safety Guidelines - GREISINGER EASYLOG 40NS K Betriebsanleitung

E25.0.2X.6C-04
3

Safety instructions

3.1 Intended Use

The logger EASYLOG 40NS K and EASYLOG 40NS W (4-20mA, 0-20mA, 0-2V bzw. 0-10V) are especially
designed for long-time monitoring of standard signals. Both the low power consumption and the high battery
capacity ensure a long recording time.
The last 48000 measuring values can be stored in the memory. In addition the LCD-display constantly
indicates both the value measured at the moment and the operating status of the logger

3.2 Safety signs and symbols

Warnings are labeled in this document with the followings signs:


3.3 Safety guidelines

This device has been designed and tested in accordance with the safety regulations for electronic devices.
However, its trouble-free operation and reliability cannot be guaranteed unless the standard safety
measures and special safety advises given in this manual will be adhered to when using the device.
1. Trouble-free operation and reliability of the device can only be guaranteed if the device is not
subjected to any other climatic conditions than those stated under 'Specification'
To protect the battery the max. permissible storage and transport temperature of the
device is +70°C.
2. General instructions and safety regulations for electric, light and heavy current plants,
including domestic safety regulations (e.g. VDE), have to be observed.
3. If device is to be connected to other devices (e.g. via PC) the circuitry has to be designed most
carefully. Internal connection in third party devices (e.g. connection GND and earth) may result
in not-permissible voltages impairing or destroying the device or another device connected.
4. If there is a risk whatsoever involved in running it, the device has to be switched off
immediately and to be marked accordingly to avoid re-starting.
Operator safety may be a risk if:
- there is visible damage to the device.
- the device is not working as specified.
- the device has been stored under unsuitable conditions for a longer time.
In case of doubt, please return device to manufacturer for repair or maintenance.
5. Do not use this product as safety or emergency stop devices, or in any other application where
failure of the product could result in personal injury or material damage.
Failure to comply with these instructions could result in death or serious injury and
material damage!
Operating Manual EASY
Caution! This symbol warns of imminent danger, death, serious injuries
and significant damage to property at non-observance.
Attention! This symbol warns of possible dangers or dangerous
situations which can provoke damage to the device or environment at
non-observance.
Note! This symbol point out processes which can indirectly influence
operation or provoke unforeseen reactions at non-observance.
40NS K/W
LOG
Page 3 of 8
.