E25.0.2X.6C-04
Contents
1
GENERAL NOTE ....................................................................................................................................... 2
2
REQUIRED ACCESSORY ......................................................................................................................... 2
3
SAFETY INSTRUCTIONS .......................................................................................................................... 3
3.1
3.2
3.3
4
5
6
7
CONNECTION ........................................................................................................................................... 4
7.1
A
DJUSTMENT OF
7.2
7.3
8
OPERATING MODE DISPLAY .................................................................................................................. 6
9
SPECIFICATION ........................................................................................................................................ 7
10
RESHIPMENT AND DISPOSAL ............................................................................................................. 8
10.1
10.2
1
General Note
Read this document carefully and get used to the handling of the device before you use it. Keep this paper
ready to hand in order to look it up if a question turns up
operation of the device before you use it. Keep this document within easy reach near the device for consulting
in case of doubt.
Mounting, start-up, operating, maintenance and removing from operation must be done by qualified, specially
trained staff that have carefully read and understood this manual before starting any work.
The manufacturer will assume no liability or warranty in case of usage for other purpose than the intended
one, ignoring this manual, operating by unqualified staff as well as unauthorized modifications to the device.
The manufacturer is not liable for any costs or damages incurred at the user or third parties because of the
usage or application of this device, in particular in case of improper use of the device, misuse or malfunction of
the connection or of the device.
The manufacturer is not liable for misprints.
2
Required accessory
interface is used to program start and read out the EASY
The EASY
BUS
For this following accessory is required:
Interface converter:
RS232 <> EASYB
or
USB <> EASYB
connecting cable: level converter to EASY
EASYBus-Configurator:
Software to configurate the EASY
GSOFT 40K (version 5.0):
Windows-Software to start the logger and read out the loggerdata.
Operating Manual EASY
....................................................................................................................................... 3
.................................................................................................................. 3
............................................................................................................................... 3
EASYLOG-
CONNECTIONS
............................................................................................................................. 5
..................................................................................................................................... 8
.................................................................................................................................... 8
(e.g. EBW1, EBW64, EBW240)
US
(e.g. EBW3)
US
LOG
40NS K/W
LOG
(
EASYLOG 40NS W) ................................................. 4
ONLY
........................................................................................... 5
Read this document carefully and get used to the
.
LOG
(display range, decimal point, display unit)
40NS.
LOG
Page 2 of 8