Sartorius LMA316PA Betriebsanleitung Seite 71

WLM6009-a10081
The following controls are used, for instance, when editing a table or setting product parameters.
Different controls are available depending on the type of editing taking place:
LMA316PA / LMA321PA - Operator Interface - Reference
Edit
Opens the corresponding dialog for editing the selected table row(s).
Print
This control is available when one or more rows in a table are selected for print-
ing.
See page 53 for information on how to connect a printer.
Delete
Selected entries are deleted.
Copy
Selected entries are copied and inserted again. In some tables, once the copy
action has taken place you are asked to select the table into which you want the
entries to be inserted.
Remarks
Adds a comment to the selected items.
Statistics
Statistics are created for the selected entries.
You can then display the statistics by choosing 1st display/2nd display (Details
on page 81).
You can edit parameters for several values at the same time.
Multi
Enables the editing of multiple values.
Entries are selected using the following controls or are selected individually by
pressing a table row.
Block 1, Block 2
Select a row by clicking it.
Press this button to define the start of a block.
The row is highlighted in yellow.
The button is displayed as pressed with the name Block 2.
Select another row by clicking it.
Press this button to define the end of the block.
You can now edit the selected entries.
All
Selects all rows.
Press again to deselect all entries.
Close
Ends the currently selected type of editing.
The view remains on the screen until another view (measurement, calibration) is
selected.
71