Direct frequency tuning
Use this feature to tune into the desired station directly
by entering the frequency.
1 Press TUNER to set the input source to FM.
2 Press AUTO/MANUAL to select automatic tuning
mode or manual tuning mode.
3 Use Numeric keypad 0-9 to specify a radio
frequency.
For example, enter 10370 using Numeric
keypad 0-9 to specify 103.70 MHz.
Hint
If the entered frequency is out of the range of the
FM tuning, "WRONG STATION!" appears in the
front panel display and then this unit automatically
tunes into the last selected station.
LISTENING TO FM BROADCASTS
■ Using station preset feature
You can store up to 40 stations (A1 to E8: 8 preset
numbers in each of the 5 preset groups).
PRESET/ TUNE
AUTO/ MANUAL
TOP MENU
PRESET
INFO.
A-E
SETUP
TV/ STB
TV VOL
TV INPUT
DVD/ USB
Automatic station preset
Available radio stations are automatically tuned in. You
can set all available stations to a preset group at the same
time by using automatic preset.
Note
Only radio stations with sufficient signal strength are
set by automatic preset. If a radio station's signal is
weak, set it by using manual preset tuning.
1 Press TUNER to set the input source to FM.
"FM" appears in the front panel display.
2 Press and hold MEMORY for more than 3 seconds.
The preset group and number as well as the
MEMORY and AUTO indicators flash. After
approximately 5 seconds, automatic presetting starts
from the current frequency and proceeds through
higher frequencies.
Press MEMORY again to cancel while the MEMORY
indicator is flashing.
A 1 : F M 8 8 . 9 0 M H z
Flashes
Hint
Press A-E
/
to select a preset group, and then
press PRESET
/
preset number to which the first station will be stored
after you perform step 2.
MEMORY
MENU
ENTER
A-E
RETURN
CODE SET
VOLUME
TUNER
MUTE
INPUT 1-4
DOCK
Flashes
. repeatedly to select a
47
6
En