Setting The Language; Moveable Table; Y-Table - struers Discotom 65 Gebrauchsanweisung

Setting the Language

Moveable Table

Y-Table

Discotom-60 /-65
Instruction Manual
When the Discotom is started for the first time, a screen display
prompts selection of a preferred language.
To change the language:

From the CUTTING menu, press MENU  button once to
select CONFIGURATION Menu.

Turn knob to navigate between parameters in the
CONFIGURATION Menu.


Push knob to select LANGUAGE. A pop-up menu

appears.

From the pop-up menu, select your preferred language
and enter the setting by pushing the knob.


Press ESC button to move from CONFIGURATION Menu

to Cutting menu.
The Y-table is a motor driven, movable table. Using the joystick (see
"Control Panel Functions") the table can be moved backwards and
forwards. The Y-table is especially useful for cutting wide
workpieces.
When Discotom is switched on, the cutting table will move to the front
reference position (the latest position of the cutting table).
However, when Discotom has been switched on and off 10 times, the
cutting table will firstly move to the front of the cutting chamber and then to
the back. This automatic movement helps keep the two guide shafts free of
Note:
cutting swarf.
13