General Information - Honeywell IDENTLOC slimline Montage, Anschluss, Anleitung

Mounting and Connection Instructions
IDENTLOC
Item no. 032235.17
1.

General information

The IDENTLOC "slimline"
and doors as well as object monitoring
moving part.
Wireless energy and data transmission between the transmission unit and the sensor.
The evaluation unit (EU) connected to the transmission unit permanently monitors the energy
and data transmission between the transmission unit and the sensor.
Application:
Normally, the transmission unit is mounted on the fixed part and the sensor on the moving part.
In case of windows and doors, the transmission unit and sensor can be concealed in the gap
between the frame and the window or door leaf.
Furthermore, the transmission unit can be used in connection with all Novar code carriers. For
object monitoring, it is for example possible to attach an ID card to the reverse of a picture and
the transmission unit to the wall behind the picture. Whether the transmission unit is to be
embedded in the wall or mounted on the wall surface depends on the constructional conditions.
P01225-10-002-03
2011-04-20
Transmission Unit slimline
sensor family serves for opening and lock monitoring of windows
without galvanic connection
approval
see Chapt. 4
between the fixed and the
D
Subject to change
GB
without notice