Mounting Instructions - Honeywell IDENTLOC slimline Montage, Anschluss, Anleitung

6
2. System design
data transmission
IDENTLOC sensor
3. Mounting
ATTENTION!
!
A sensitive ferrite antenna is integrated in the housing of the transmission unit.
Therefore,
3.1 Dimensions
3.2

Mounting instructions

We generally recommend carrying out a
is described in the chapter "Teach mode" of the mounting and connection instructions of the
evaluation unit.
The installation position to be selected
on instructions of the sensor).
If the transmission unit is to be used together with another ID data carrier, carry out a test mea-
surement prior to the installation in order to determine the transmission range.
3.3 Installation in the frame
Drill the holes for the fixing screws and the cable bushing according to the following drawing.
The drill diameter
- for wood 2.0 mm, for metal 2.7 mm.
Mounting and Connection Instructions
energy and
slimline
avoid hard impacts high pressures
(in mm)
depends on the sensor used
for the supplied fixing screws
IDENTLOC Transmission Unit s
transmission unit (032235.17)
6 m max.
a tansmission distance 2 mm to 5 mm
,
test measurement
depends on the material
evaluation
unit
EU
and distortions
13.1
prior to the mounting. The procedure
(see mounting and connecti-
:
limline
!
4.6