Werbung
Set-Point Current Threshold Setting
(Minimum Access Level Required: "0")
"WR[space]Y[space] xxxxxx"[Enter]
WR = Write
xxxxxx = Current Set-Point value in nA (from 0 to 100000000)
Set-Point Current Threshold reading
"RD[space]Y"[Enter]
Report Setting
"RT[space]X"
or
"RT[space]X[space]Y"[Enter]
or
"RT[space]X[space]Y[space]Z"[Enter]
Ion Pumps Control Unit (No Battery) User Manual / 87-900-123-01 (B)
Y =
14 for channel 1
15 for channel 2
16 for channel 3
RD = Read
Y =
14 for Channel 1
15 for Channel 2
16 for channel 3
X =
type [0, ..., 5]
(see detailed description on "About Report" chapter)
Y =
time rate[0, ..., 255] based on 100 mSec tick,
default is "3".
For time rate = 0, to stop continuous reporting mode
and start report on request (see Request Report
Command)
Technical Information
Pin Functions
87/106
5
Werbung
Kapitel
