Motor Settings - Megasat HD 660 Twin Bedienungsanleitung

4. Main menu
LNB (Polarisation)
The polarization switches at Universal LNBs between the vertical and horizontal plane. The default
setting (Auto) is correct in most cases.

Motor settings

If you operate your satellite dish with a motor, use the t u buttons to select between USALS, DiSEqC
1.2 or None. At the bottom of the screen other settings appear. Use the corresponding color buttons
to get to the detailed engine settings.
USALS settings
Set limit (red button): Choose between „Limitation off", „West border" and „East border".
Limitation: The mirror has no fixed limit to stop at a certain point.
West limit: Press the t u buttons to turn the mirror to the east or west. Press until the desired positi-
on of the western boundary is reached. Then save the settings.
Eeast border: Press the t u buttons to turn the mirror to the east or west. Press until the desired
position of the east border is reached. Then save the settings.
Go to reference: Press OK to get to the 0 ° starting point.
Set limit (green button): Enter the latitude and longitude of the respective satellite here.
DiSEqC 1.2 settings
Set limit (red button): see USALS settings
Delete all (green button): Deletes all satellite positions of the motor.
Operating mode
Select the tuner assignment here. If you only want to use one tuner, please set the operating mode
to „Tuner 1" or „Tuner 2". Depending on which tuner input you have connected the coaxial cable to.
If you want to use the receiver as a twin tuner, set the operating mode to „Twin Tuner". You can then
record one channel (via tuner 1) while watching another (via tuner 2).
Signal
Check the signal strength and quality of Tuner 1 and/or Tuner 2.
ENGLISH
15