Operation - Vimar 01910 Montageanweisungen

• Button .
When this button is held down, all parameters set return to their
original default status (clock reset, user programs deleted, return
to default values for the 3 temperature levels).

7 OPERATION.

Complete the electrical connections, install the device, then insert
the batteries.
If the relay is activated, the symbol
bol in summer.
The symbol indicates that the TX radio module is present or the
relay module is missing. Wait no more than 2 minutes for automatic
recognition, or reset the device.
• SWITCHING ON.
Press the button and select the desired operation.
• SHUTDOWN.
Press the button , select the desired mode, then press the button
24 - ENGLISH
appears in winter or the sym-
.
• OPERATION IN MANUAL MODE.
Press the button until the symbol
Select the desired temperature using the button
the button .
If necessary, wait 5 seconds for the operation to be confirmed.
• OPERATION IN AUTOMATIC MODE.
Press the button until the daily programming pattern appears
on the display. It is possible to switch temporarily to manual mode
by selecting the desired temperature with the button
5 seconds for the operation to be confirmed. The new setting will
remain in effect until the next time the temperature setting is
changed, after which the saved program will be restored. For re-
turn immediately to automatic mode, press the button
appears on the display.
, then press
then wait
.