Installation Of The Appliance; Room Ventilation - Angelo Po 6VTIW Bedien- Und Installationshandbuch

HANDLING AND LIFTING
The appliance can be transported by hand using
the opening provided on the side of the packaging.

INSTALLATION OF THE APPLIANCE

All installation stages must be considered right from
production of the general layout. Before starting
these stages, as well as deciding the place of instal-
lation, if necessary, the person authorised to carry
out these operations must organise a "safety plan"
to protect the people directly involved, and he must
also ensure strict compliance with all legal require-
ments, especially those relating to mobile work-
sites.
The place of installation must have all the connec-
tions needed to supply the appliance and dispose of
the production residues, must be suitably lit and
must meet all legal health and hygiene require-
ments to prevent the contamination of the foods.
If necessary, fix the exact position of each individual
appliance or subassembly by mark coordinates to
locate them correctly. Install at least 5 cm from the
wall behind the appliance. Install in accordance with
the relevant legislation, regulations and specifica-
tions in the country of use.
Important
During installation and use, make sure that
the air intake and discharge ducts are
unobstructed.

ROOM VENTILATION

The room where the appliance is installed must
have air inlets to ensure that the appliance can op-
erate correctly and provide the necessary air ex-
change in the room itself.
The air inlets must be of appropriate size and must
be protected by gratings and placed so that they
cannot be obstructed.
Important
When installing the appliance on the va-
rious types of base counters available as
accessories, refer to the instructions sup-
plied with these items.
- 13 -
IT
GB
DE
FR
ES
English