TEFAL Ultrablend Boost Bedienungsanleitung Seite 138

WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK ?
Problems
Appliance does not work
The appliance stopped
while in use
Excessive vibrations
Leak or overflow from
the lid
138
Causes
The plug is not connected.
The blender jug is not
positioned correctly on the
motor unit or the jug and
lid are correctly in place
and are not locked onto the
motor unit.
Appliance, keypad or
program not responding
In case of overheating
Overflowing
Overload or overheating
The product is not placed
on a flat surface.
Volume of ingredients is
too high.
Volume of ingredients is
too high.
The lid is not correctly
positioned.
Solutions
Connect the appliance to
a socket with the same
voltage as indicated on
the rating plate of the
appliance.
Check that the blender jug
and the lid are positioned
properly on the motor
unit as explained in the
instructions.
Unplug the appliance, wait
for 1 minute and plug in
again.
Switch the appliance off
using the start/stop button,
unplug and leave it to cool
down for approx.15-20
minutes.
Reduce the quantity of the
ingredients processed.
Switch the appliance off
using the start/stop button,
unplug and leave it to cool
down for approx.15-20
minutes.
Reconnect the appliance
to the power supply and
resume blending.
Place the appliance on a
flat surface.
Reduce the quantity of
ingredients processed.
Reduce the quantity of
ingredients processed.
Place the lid correctly on
the blender jug.