Yamaha RX-V3800 Bedienungsanleitung Seite 121

Using Zone 2/Zone 3 remote control
You can control Zone 2 or Zone 3 features by using the
supplied Zone 2/Zone 3 remote control. First, set the ID1/
ID2 switch and ZONE 2/ZONE 3 switch appropriately.
TUNER CD
MD/TAPE DVD
1
DTV/CBL DVR
2
PRESET
A/B/C/D/E
3
ID1 ID2
4
Controlling the amplifier function
1 Input selector buttons
Selects the desired input source for the controlling zone.
4 ID1/ID2 switch
Switches the remote control ID between ID1 and ID2 (see
page 121).
5 POWER
Turns on Zone 2 or Zone 3.
Note
This button is operational only when A MASTER ON/OFF on
the front panel is pressed inward to the ON position.
POWER
5
STANDBY
CD-R
6
BD/HD DVD NET/USB
VCR V-AUX/DOCK
7
VOLUME
8
MUTE
ZONE 2 ZONE 3
9
6 STANDBY
Sets Zone 2 or Zone 3 to the standby mode.
Note
This button is operational only when A MASTER ON/OFF on
the front panel is pressed inward to the ON position.
7 VOLUME +/–
Increases or decreases the volume level of Zone 2 or Zone 3.
8 MUTE
Mutes the sound of Zone 2 or Zone 3. Press again to
restore the audio output to the previous volume level.
9 ZONE 2/ZONE 3 switch
Switches between the operation mode of Zone 2 and that
of Zone 3.
Controlling the tuner function (see page 53)
Select "TUNER" as the input source of the controlling zone
to use the following functions.
2 PRESET k / n
Selects one of the 8 preset station numbers (1 to 8) when
the colon (:) is displayed in the front panel display (see
page 55).
3 A/B/C/D/E
Selects one of the preset station groups (A to E) (see
page 55).
Using multi-zone configuration
119
En