Maintenance; Transportation; Storage - Dräger Aerotest 5000 Gebrauchsanweisung

To open individual test results select "Open a test results file". Once
downloaded further information can be added:
Location of measurement,
Date of next test (or hours run on HP compressors),
Test engineer and relevant address.
NOTICE
i
i
This information can also be recorded as default.
For each "test" you will need to confirm whether the recorded test
volume and pressure was sufficient for the tested air system. Select
"Pass" or "Fail" as appropriate.
NOTICE
i
i
In addition, there is the option of entering "N/A" against these
categories. In this case, the test certificate will only validate
the air quality excluding pressure and flow.
Then save the test results file. A test certificate can be printed. The
Logo stored on the startup display automatically appears on the test
certificate.
Please observe the country-specific valid legal regulations regarding
the legal obligation to retain test results.
Dräger Aerotest 5000
4

Maintenance

The Dräger Aerotest 5000 is calibrated by Dräger according to the
intended use. We recommend that an annual inspection of the
calibration and a required readjustment be carried out by Dräger.
5

Transportation

The Dräger Aerotest 5000 is transported in a hard weatherproof case.
The Dräger Aerotest 5000 can also be removed from the case and
used as a standard device.
6

Storage

Store all parts in a dry, cool and dust-free place. Protect from exposure
to direct sunlight and heat. Store Dräger-Tubes safely out of reach
from unauthorised persons.
Maintenance
21