Part 4. Infrared Remote (Included) - involight SLIMPAR710PRO Bedienungsanleitung

Part 4. Infrared remote (included):

The supplied remote control allows you to control the "SLIMPAR710PRO" even without a DMX controller and
offers much more possibilities than the functions that can be called up via the on-board menu.
Make sure that the remote control is pointing directly at the device and that there are no obstacles between the
device and the remote control.
The <SL/AU> button set up the device in SOUND-ACTIVE mode, AUTO mode, COLOR CHANGE mode, COLOR FADE mode
or SLAVE mode. Each push of this button switches to the next mode.
SPEED Mode:
With <FS/SP> button adjust the speed in AUTO mode, SOUND_ACTIVE mode, STROBE mode, COLOR FADE mode or
COLOR JUMPING mode.
1. Push the <FS/SP> on the remote.
2. Push the <+> or <–> to select the requested speed
Programm Mode:
1. Push the <PROG> on the remote.
2. Push the <+> oder <–> to select the requested AUTO program from 16
SOUND Mode:
The <SL/AU> button set up the device in SOUND-ACTIVE mode, AUTO mode, COLOR CHANGE mode, COLOR FADE mode
or SLAVE mode. Each push of this button switches to the next mode.
1. Set up the device into SOUND-ACTIVE mode
2. Push the <+> or <–> to select the requested SOUND-ACTIVE program from 16
3. Push the <FS/SP> on the remote.
4. Push the <+> or <–> to select the requested microphone senitivity level from 8
With R, G, B, W, A and UV buttons you can select the desired colors for the wash effect.
1. Push the <+> or <-> to select between the brightness levels.
2. Push the <FS/SP> on the remote control to turn on strobe effect.
3. Push <+> or <–> to adjust the strobe speed from slow to fast
4. Push the < FS/SP > to turn off the strobe effect.
DMX Mode setup:
In DMX mode, the functions are controlled on 6, 7, 8, 9 or 11 channels.
1. Push the <CH> on the remote
2. Push the <+> or <–> to select between the 5 modes
28