Infrared Remote Control (Included) - involight ZoomSpot415 Bedienungsanleitung

IRC-CONTROLLING:
"INFR".
Press the "Menu" key until the display shows The IR remote control menu is displayed. Press "Enter"
"ON" "OFF".
again to select or With the "Up" and "Down" buttons you can now activate the IR remote
control "ON" or deactivate "OFF".
DMX-MODE:
"ADDR"
To select the DMX mode and set the start address, press "Menu" button until the display appears.
"4CH" "9CH"
Press "Enter" again to select or mode. Press "Setup" again to select DMX start address
"d1" "d512".
to With the "Up" and "Down" buttons, you can now set the desired start address.
MASTER/SLAVE-OPERATION:
The "ZoomSPOT415" can be linked to other devices. To set a device as a „Slave", press the „Menu" button until
„ Slav"
. Confirm with the „Enter"key. Select the desired program on the master device.
the display shows
The interconnected devices are now working synchronously.

3.3 Infrared remote control (included):

The supplied remote control also allows the "ZoomSPOT415" to be controlled without a DMX controller and offers
much more possibilities than the functions available via the on-board menu.
Make sure the remote control is pointing directly at the unit and there are no obstructions between the unit and the
remote control.
BLACK OUT Mode
1. Press BLACK OUT to off existing modes, Press BLACK OUT to return the last modes.
AUTO Mode
1. Press <AUTO> on the IRC.
2. Press <+> or <–> to choose between the different AUTO programs.
SOUND Mode
1. Press <SOUND> on the IRC.
2. Press <+> or <–> to choose between the different SOUND programs.
STROBE Mode
1. Press <STROBE> on the IRC.
2. Press <+> or <–> to adjust the strobe rate.
3. Press <STROBE> again to turn off the strobe.
SPEED Mode
1. Press <SPEED> on the IRC.
2. Press <+> or <–> to adjust the auto/sound program speed.
SENSITIVITY Mode
1. Press <SENSITIVITY> on the IRC.
2. Press <+> or <–> to adjust the microphone sensitivity value on the light.
DMX/% Mode
To enable DMX or disallow DMX on the product
Manual Mode
1. Press <MANUAL> on the IRC.
2. Press <R>, <G>, <B> and <W> to choose your color.
3. Press <+> or <–> to choose static colors.
FADE/ UNIT
Setting zoom angle
1. Press <FADE/ UNIT>on the IRC.
2. Press <+> or <–> to setting zoom angle.
1. Press <BLACK OUT> to turn off the light sources,
2. Press <BLACK OUT> again to turn on the light sources.
22