Faults - WIKA UTN-EX Betriebsanleitung

6. Faults

The most frequent root causes and required countermeas-
ures are listed in the following table.
Störungen
Bypass level indicator
cannot be fitted at
the planned place on
the vessel
KSR KUEBLER Operating instructions Top-mounted level gauge UTN-EX
Ursachen
The thread sizes or
flange sizes for the
bypass level indicator
do not match
Thread on the
screwed coupling on
the vessel is faulty
Mounting thread on
the bypass level indi-
cator is faulty
CAUTION!
Bodily injuries, property and environmental damages
If faults cannot be rectified with the help of the listed
measures, immediately shut the unit off.
Ensure the pressure is switched off and secure the

unit against unintentionally being switched on.
Contact the manufacturer.

If return shipment is necessary, follow the instruc-

tions in Chapter 8.2 "Return Shipment".
Maßnahmen
Modification of the
vessel
Return to the factory
Rework the thread
or replace the
screwed
coupling
Return to the factory
17