WIKA UTN-EX Betriebsanleitung Seite 16

Installing the float
1. Clean the float of anything stuck on it in the area of the float mag-
net system.
2. Mount the bypass level indicator on the tank to be monitored using
the mounting flange (5) provided.
3. Please use gaskets, screws, washers and nuts suitable for the
flange when mounting. Please ensure adequate corrosion re-
sistance when selecting the gasket.
Attachment of accessories to the bypass level indicator
For the mounting of accessories (e.g. BLR or BLM sensors or BGU
switches), the relevant maximum values for the instrument must be
considered. The applicable laws and directives for the assembly and the
planned purpose of application must be observed.
16
Always observe the mounting and operating instructions
of accessories before putting them into operation.
KSR KUEBLER Operating instructions Top-mounted level gauge UTN-EX