Yamaha CDRHD1500 Bedienungsanleitung Seite 37

Setting for a timer recording
Memo
• You cannot set a timer recording for CD-R and CD-RW copying.
• You can skip to step 3 in the following procedure by pressing TIMER REC on the remote control.
URAL SOUND HDD/CD RECORDER
HDD CDR COPY
L
A.M.Q.R.
MAX
1.
Carry out steps 1 and 2 in "Recording input audio
source" (P.31).
For the HDD recording mode (P.35), select one of "Manual"
(manual recording), "Track Synchro" (track-synchronized
recording) or "Auto Period" (auto-period recording). Other
modes cannot be selected when timer recording is made.
2.
Press and hold REC for approximately three seconds
(press TIMER REC on the remote control).
The following screen appears in the display.
T . S p a n
3.
Press t/e or r/y (press E, R, Q or W on the
remote control) to switch between hour and minute,
then rotate the MULTI JOG knob (press +/–, H or G on
the remote control) to adjust the total recording time.
4.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the total time of timer recording.
"Timer Standby" appears on the display.
T i m e r S t a n d b y
G
To cancel timer recording setting, press a.
MULTI JOG
TEXT/TIME MODE
TRACK NO. COMPLETE
BOOKMARK
DIGITAL REC LEVEL
INPUT
REC FINALIZE ERASE
OPTICAL
COAXIAL
ANALOG
REC
t/e, r/y
1 h 2 m
REC
L
dB –30 –10 –6 –2 0
SYNC TIME
R
L
dB –30 –10 –6 –2 0
R
RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD
MULTI JOG
PUSH ENTER
MENU
CLEAR
ANALOG REC LEVEL
MIN MAX
+, –
5.
Leave the power of this unit on. Turn off the power
of this unit by the external timer.
If the power of this unit is turned on by the external timer,
"Timer Standby" flashes for approximately five seconds. Then
recording starts according to the setting.
Memo
• Once timer recording is set, recording starts every time the power
of this unit is turned on. To cancel the setting, press a while
"Timer Standby" is flashing, or while recording is being made.
• You can not set multiple total recording times with this unit. To
record multiple programs the time lengths of which are different
using an external timer, make settings refering to the setting
examples shown below. If necessary, edit (partially erase or divide
tracks) sources recorded on the HDD. For details, refer to "Part
Erase" (P.60) and "Track Divide" (P.62).
<Setting example>
Recording two programs: one starts at 9:00 - ends at 10:00
(Setting method 1)
External timer: on 8:58 - off 10:03, on 10:28 - off 11:33
"T.Span": 1h 2m
(Setting method 2)
External timer: on 8:58 - off 11:03
"T.Span": 2h 2m
COPY A. M. Q. R. TIMER REC REC
REC
FINALIZE ERASE INPUT
REPEAT RANDOM INTRO TEXT/TIME
A B C D E F G H I
1 2 3
J K L M N O P Q R
4 5 6
S T U V W X Y Z
7 8 9
SPACE SYMBOL BOOKMARK
0 10
MODE MENU
Cursor buttons, ENTER
ENTER
COMPLETE CLEAR
TRACK NO.
WRITE
HDD
CDR
E, R
the other starts at 10:30 - ends at 11:00
3
33