ENGLISH • Instructions manual
- Monthly checks:
- Clean and lubricate (with environment-friendly detergents only) the swing arm and vertical slide on the relative ways.
- Check the oil level in the lubricator and, if necessary, top up with SAE20 non-detergent oil as far as the maximum level.
- Clean with a dry cloth. Avoid contact with solvents.
- Check the flow rate of oil through the transparent cup (correct flow rate: 1 drop of oil for every 2 bead breaking cycles). Adjust
if necessary by turning the upper adjustment screw.
ATTENTION
Keep the work area clean.
Do not clean the machine with compressed air or jets of water.
When cleaning the area avoid raising dust as far as possible.
If the machine is to be scrapped, remove all electrical, electronic, plastic and metal parts and dispose of them separately in
accordance with current provisions as prescribed by law.
OIL - WARNINGS AND RECOMMENDATIONS
Do not dispose of used oil into sewage mains, storm drains, rivers or streams. Contact a specialised firm for disposal.
When the oil has been removed, degrease the area with suitable solvents taking care to disperse solvent fumes. Dispose of all
residual cleaning material in accordance with procedures as prescribed by law.
- Avoid contact with the skin.
- Avoid the formation and diffusion of oil mist
- Apply the following hygiene measures:
• protect personnel and equipment from oil splashes (wear suitable clothing, install screens on the machine)
• wash frequently with soap and water; do not use cleaning products or solvents that irritate the skin or remove its natural
protective oil
• do not dry hands with dirty or greasy rags
• change clothing if impregnated with oil and in any event at the end of each work shift
• do not smoke or eat when your hands are greasy
- Apply the following preventive and protective measures:
• wear lined industrial gloves designed to resist mineral oils
•use safety goggles to protect the eyes
•use aprons resistant to mineral oil
•use protective screens to protect from oil splashes
- Ingestion: seek medical attention immediately and provide all characteristics of the oil type ingested.
- Inhalation: for exposure to high concentrations of fumes or oil mist, move the affected person to the open air and seek medical
attention immediately.
- Eyes: bathe with plenty of running water and seek medical attention immediately.
- Skin: wash with soap and water.
DEMOLITION
Disposal of used oil
Oil spills and leaks
Precautions when using oil
Mineral oil: First Aid procedures
35
M 39 ATV