Initial Operation; Before Initial Use - Ernesto Z28071 Bedienungsanleitung

General Safety Instructions / Initial Operation / Use
CAUTION! RISK OF INJURY! The blades
are very sharp! Never touch the blades when
assembling, using or cleaning the product.
Always use the multi-purpose grater together
with the vegetable holder
½
Use the multi-purpose grater on a stable,
smooth surface. Make sure that the surface is
not sensitive to vegetable or fruit juices.
½
Do not expose the device to extreme tempera-
tures or severe mechanical stresses. This can
otherwise cause deformation of the product.
½
FOOD SAFE! This product does not
affect the taste and aroma properties
of foodstuffs.
½
Use the utensil for culinary purposes only. Keep
all the parts clean, as they come into contact
with foodstuffs. Use the supplied equipment only.
Note: Some foodstuffs contain strong, natural
colours that could lead to staining or discoloration
of the plastic parts. This does not affect operation
of the multi-purpose grater.
½
Do not use the multi-purpose grater to cut
frozen foods.

Initial Operation

©

Before Initial Use

©
Please clean all parts with warm water and a
mild washing-up liquid before initial use. Re-
move any stickers. Carefully dry off all parts.
Use
©
Flat slicer - suitable for cucumbers,
8
onions (see Fig. H).
Flat slicer with julienne attachment
8
to cut thin and thick sticks, suitable for potatoes and
carrots (see Fig. I).
16 GB/MT
30273_Content_LB5new.indd 16
Waved slicer
potatoes and carrots (see Fig. J). To create a waffle
cut, push the food forward and then turn to 90°
and push the food forward again (see Fig. K).
.
1
Grater
(see Fig. L).
-
3
- for crinkle-cut slices, suitable for
7
- suitable for garlic etc.
6
Open out the stand beneath the unit
place the unit on a stable and smooth surface
4
(see Fig. A).
Note: you can also place the multi-purpose
grater on a bowl. To do this, close the stand
beneath the unit and place the multi-pur-
4
pose grater on a bowl. Take care that the teeth
underneath the unit fit onto the rim of the
4
bowl (see Fig. B).
Unlock the switch on the front of the unit
(see Fig. D). Carefully remove whichever blade is
installed. Choose one of the blades
and insert it in the unit (see Fig. E). Press the
4
blade , , down carefully and lock the
6 7 8
switch again.
Turn the small setting dial
anticlockwise direction to set the cutting width.
You can choose a cutting width of between 3
and 7 mm. The engraved scale on the unit
indicates the set cutting width (see Fig. C).
Pull the large setting dial
2
attachment . Turn the large setting dial
3
clockwise or anticlockwise direction to set the
cutting width of the julienne attachment
(see Fig. F).
Place a piece of fruit or vegetable in the vege-
table holder (see Fig. G).
1
Move the vegetable holder
on the unit . Press the food holder
4
and gently onto the unit
4
and
4
4
, ,
6 7 8
in clockwise or
5
4
out to use the julienne
in
2
3
back and forth
1
evenly
1
.
19.03.09 09:01