Using The Unit; Cleaning & Maintenance - Clatronic lfg 2762 Bedienungsanleitung

5....-05-LFG 2762_Neu
GB
1. Insert the fat collection tray in the front opening. If necessary, turn the thermost-
at regulator to the „OFF" position.
2. Put the plug into an earthed 230 V, 50 Hz mains socket. The red and green con-
trol lamps light up.
3. Select the desired grill temperature on the thermostat regulator.
Settings:
4. While the grill is heating up please keep the grill surfaces closed. When the
green control lamp goes off the grilling temperature has been reached.
5. Open the cover and place the food to be grilled. Then close the lid gently.
6. Grilling is finished after 8 to 10 minutes (depending on the thickness of the food
being grilled).
7. Open the cover and remove the cooked food with a wooden fork or similar kit-
chen utensil. Do not use any sharp or cutting objects as they may damage the
coating of the grill plates.
8. When food is not being grilled the grill surfaces should always be kept closed.
9. If you would like to stop the cooking process, turn the thermostat regulator to
„OFF" and remove the mains plug.
• Pull out the mains plug and allow the unit to cool down.
• Brush off crumbs or food remains from the grill plates.
• Pull out the fat collection tray. Empty the contents and clean the tray in a sink.
• Clean the grill plates and the appliance with moist towel.
• The machine must never be immersed in water!
• Do not use abrasive detergents.
This device has been tested according to all relevant current CE guidelines,
such as electromagnetic compatibility and low voltage directives, and has been
constructed in accordance with the latest safety regulations.
Subject to technical changes without prior notice!
The device supplied by our Company is covered by a 24 month guarantee starting
on the date of purchase (receipt).
During the life of the guarantee any fault of the device or its accessories *) ascriba-
ble to material or manufacturing defects will be eliminated free of charge by repai-
ring or, at our discretion, by replacing it. The guarantee services do not entail an
24
06.12.2002 9:38 Uhr

Using the unit

L = LOW for a low temperature
M = MEDIUM for a medium temperature
H = HIGH for a high temperature
Cleaning & maintenance
Guarantee
Seite 24