Troubleshooting; Ec Declaration Of Conformity; Technical Data - Black+Decker BEHTS455 Handbuch

ENGLISH

Troubleshooting

Problem Possible Cause
Slow running, noisy or Dry, corroded blades.
hot blades.
Blades or blade support
bent.
Bent or damaged teeth.
Loose blade bolts.
Unit will not start. Lock off not fully
operated.
Cord not plugged in.
Circuit fuse is blown.
Circuit breaker is
tripped.
Cord or switch is
damaged.

Technical data

Voltage V
AC
Power input W
Blade strokes
min
-1
(no load)
Blade length cm
Blade gap mm
Blade brake
s
time
Saw blade Max
mm
cut
Weight kg
Level of sound pressure according to EN 60745:
Sound pressure at operator position (L
Sound power (L ) 98 dB(A), uncertainty (K) 2.0 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
Vibration emission value (a ) 3.3 m/s
h, D
8
(Original instructions)
Possible Solution
Lubricate blades.
Straighten blade or
blade support.
Straighten teeth.
Tighten blade bolts.
Check that lock off is
fully forward prior to
moving main trigger.
Plug cord into a work-
ing outlet.
Replace circuit fuse.
(If the product repeat-
edly causes the circuit
fuse to blow, discon-
tinue use immediately
and have it serviced
at a BLACK+DECKER
service center or
authorized servicer.)
Reset circuit breaker.
(If the product repeat-
edly causes the circuit
breaker to trip, discon-
tinue use immediately
and have it serviced
at a BLACK+DECKER
service center or
authorized servicer.)
Have cord or
switch replaced at
BLACK+DECKER
Service Center or
Authorized Servicer.
BEHTS455 BEHTS501GG
Type 1
230
550
1835
55
22
<1
35
2.54
) 88 dB(A), uncertainty (K) 4 dB(A)
pA
, uncertainty (K) 1.5 m/s
2 2

EC declaration of conformity

OUTDOOR NOISE DIRECTIVE
BEHTS455, BEHTS501GG – Hedge Trimmer
Black & Decker declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 60745-1:2009 +A11:2010,
EN 60745-2-15:2009 +A1:2010
2000/14/EC, Hedge trimmer, Annex V
Measured sound power (LwA) 98 dB(A)
Guaranteed sound power (LwA) 100 dB(A)
These products also comply with Directive
2014/30/EU and 2011/65/EU.
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of Black & Decker.
Black & Decker Europe, 210 Bath Road, Slough,
Type 1
230
Guarantee
600
Black & Decker is confident of the quality of its products and
offers consumers a 24 month guarantee from the date
1840
of purchase. This guarantee is in addition to and in no way
60
prejudices your statutory rights. The guarantee is valid within
the territories of the Member States of the European Union
25
and the European Free Trade Area.
<1
To claim on the guarantee, the claim must be in accordance
35
with Black&Decker Terms and Conditions and you will need to
submit proof of purchase to the seller or an authorised repair
2.65
agent. Terms and conditions of the Black&Decker 2 year
guarantee and the location of your nearest authorised repair
agent can be obtained on the Internet at www.2helpU.com, or
by contacting your local Black & Decker office at the address
indicated in this manual.
Please visit our website www.blackanddecker.co.uk to register
your new Black & Decker product and receive updates on new
products and special offers.
MACHINERY DIRECTIVE
Uncertainty (K) 2 dB(A)
Engineering Director
Berkshire, SL1 3YD
R. Laverick
United Kingdom
30/10/2017