IKEA HYGIENISK Handbuch Seite 15

ENGLISH
There is also an acoustic signal that sounds
when the programme is complete. This
acoustic signal is activated by default and
you can deactivate it.
In addition, an acoustic signal sounds
before the AutoOpen opens the door. This
acoustic signal stops only if AutoOpen is
deactivated.
How to deactivate the acoustic signal for
the end of programme
Make sure the appliance is in user mode.
1. Press
• The indicators
and
• The indicator
• The display shows the current setting.
– = the acoustic signal is
deactivated.
– = the acoustic signal is
activated.
2. Press to change the setting.
3. Press on/off to confirm the setting.
How to set the colour of the TimeBeam
It is possible to change the colour of the
TimeBeam to match the colour of the
kitchen floor. There are several colours
available. The TimeBeam can also be
deactivated.
Make sure the appliance is in user mode.
1. Press .
• The indicators
and
• The indicator
• The display shows a number and
letter C. Each number refers to a
different colour.
– = TimeBeam deactivated.
, , ,
are off.
still flashes.
, , ,
are off.
still flashes.
2. Press repeatedly to change the
colour.
3. Press on/off to confirm the setting.
AutoOpen
AutoOpen improves the drying results with
less energy consumption. During the drying
phase, the door opens automatically and
remains ajar.
AutoOpen is automatically activated with
all programmes excluding
applicable).
To improve the drying performance refer to
the DryPlus option or activate AutoOpen.
Do not try to close the appliance
door within 2 minutes after
automatic opening. This can
cause damage to the appliance.
If children, pets or people with
disabilities have access to the
appliance, deactivate AutoOpen.
The automatic opening of the
door may pose a danger and
expose possible hazards inside
the appliance (such as knives,
sharp objects, chemicals).
How to deactivate AutoOpen
Make sure the appliance is in user mode.
1. Press .
15
(if