Optimum OPTImill F 80 Betriebsanleitung Seite 307

Brief instruction 808D Milling
Machine
coordinate
system
808D
Preparation
The Sinumerik 808D uses a
coordinate system which is
derived from the DIN 66217
standard.
The system is an international
standard and ensures
compatibility between machines
and coordinate programming.
The primary function of the
coordinate system is to ensure
that the tool length and tool
radius are calculated correctly in
the respective axis.
Page 307
SEQUENCE
Passwords at the control are used to set the user's right to
Passwords
access the system. Tasks such as "Basic Operating",
"Advanced Operating" and commissioning functions all
depend on the passwords.
No password
Customer's password
Manufacturer's password
Customer's password = CUSTOMER
Changing
Manufacturer's password = SUNRISE
password
Usually the machine, operator does not need to change the
Step 1
password.
The service mode is opened with the
appropriate key combination.
In the service mode, the password
can be activated and deactivated.
Step 2
Set
Enter customer's or manufacturer's password
password
Change
Change customer's or manufacturer's password
password
Delete customer's or manufacturer's password
Delete
password
End
Operating and Programming — Milling
OPTIMUM
M A S C H I N E N - G E R M A N Y
Machine operator
Advanced operator
OEM engineer
Set
password
Change
password
+
Delete
password