Making An Electrical Connection - Sharp KH-9I26CT01-EU Bedienungsanleitung

B
Min.
20mm
Min. Gap 5mm
Min. Gap 5mm
· Apply one-sided self-adhesive sealing
tape supplied all the way round the
lower glass edge of the cooking sur-
face along the outer edge of the glass
ceramic panel. Do not stretch it.
· Screw the 4 worktop mounting brac-
kets on the side walls of the product.
Separator
Separator
Min. 20mm
Separator
Separator
Min. 10mm
View B
View B
Worktop mounting bracket

Making an electrical connection

Before making a connection, check
that:
The voltage power supply is the same
as that quoted on the rating plate
which is situated at the back of your
hob.
The circuit can support the appliance
load (see the rating plate).
The power supply has a grounded
connection connection, which complies
with the provisions of current regulati-
EN - 15