ESAB PT-37 Bedienungsanleitung Seite 52

SECTION 4
PT-37
PLASMARC™ Cutting Torch
ESP-101 Plasma System
1. GAS BAFFLE 30-70 AMP, P/N 0558005217
2. ELECTRODE SILVER, P/N 0558004875
3. NOzzLE 60 AMP, P/N 0558008417
4. RETAINING CUP W/ THREADS, P/N 0558006600
5. SHIELD 50-90 AMP, P/N 0558006602
5. (alternate) - SHIELD, 50-90 AMP, Ohmic Terminal P/N 0558012339
5
Reminder for PowerCut-900 users:
Power Source Ratings: 60 Amps @ 60% duty cycle.
50 Amps @ 100% duty cycle.
The maximum output of the PowerCut 900 is 60 amps. However, if your application calls for a duty cycle
greater than 60% the output should be reduced to 50 amps or less.
Material:
Amperes:
Plasma gas:
IMPORTANT !!!
52
OPERATION
Stainless Steel
60
Air @ 70 psi (4.8 bar) *
* See section 4.2.1