Product Features; Battery Charging - Bosch 80+R60 Originalbetriebsanleitung

OBJ_BUCH-1347-001.book Page 25 Friday, January 21, 2011 10:30 AM

Product Features

The numbering of the product features shown
refers to the illustration of the measuring tool
on the graphic page.
1 Display
2 Measuring button
3 Button for grade measurement/calibration **
4 Button for function mode/basic settings **
5 Minus button
6 Button for result/timer function **
7 Button for measured-value list/storage of
constant **
8 Button for clearing the internal memory/
On/Off **
9 Positioning pin
10 Button for selection of the reference level
11 Plus button
12 Button for length, area and volume measure-
ment
13 Charge socket cover
14 Socket for charge connector
15 Fixture for carrying strap
16 Laser beam outlet
17 Reception lens
18 Serial number
19 1/4" thread
20 Laser warning label
21 Charge connector
22 Battery charger
23 Protective pouch
24 Measuring rail
25 Locking lever for measuring rail
26 Tripod*
27 Laser viewing glasses*
28 Laser target plate*
* The accessories illustrated or described are not in-
cluded as standard delivery.
** Keep button pressed to call up the extended func-
tions.
Bosch Power Tools
Display Elements
a Measured-value lines
b "ERROR" indication
c Result line
d Digital vial/position of measured-value list
entry
e Measured-value list indicator
f Measuring functions
Length measurement
Area/surface measurement
Volume measurement
Continuous measurement
Indirect height measurement
1
Double indirect height measurement
1
2
Indirect length measurement
1
Timer function
Wall-surface measurement
Grade measurement
g Battery charge-control indicator
h Laser, switched on
i Measurement reference level
k Temperature warning
Assembly

Battery Charging

Do not use other battery chargers. The sup-
plied battery charger is designed for the Lith-
ium-Ion battery in your machine.
Observe the mains voltage! The voltage of
the power source must correspond with the
data on the type plate of the battery charger.
Note: The battery is supplied partially charged.
To ensure full capacity of the battery, complete-
ly charge the battery in the battery charger be-
fore using your power tool for the first time.
The lithium-ion battery can be charged at any
time without reducing its service life. Interrupt-
ing the charging procedure does not damage the
battery.
2 609 140 807 | (21.1.11)
English | 25