Help In Case Of Malfunction - AL-KO 3.22 sE Betriebsanleitung

Help in case of malfunction

Malfunction
Motor does not start
The motor loses power
Grass collector does not
fill up sufficiently
For malfunctions that are not listed in this table or that you cannot resolve yourself, please contact our respon-
sible customer service.
474269_f
Possible cause
No power supply
Machine cable defective
Cutting blade blocked
Too much grass in the
discharge channel or
housing
Cutting blade blunt
Lawn damp
Grass collector clogged
Too much grass in the
discharge channel or
housing
Cutting blade blunt
Solution
Check the mains fuse and extension lead.
Contact an AL-KO service centre/authorised specialist
company.
Clean the discharge channel/housing, the cutting blade
must rotate freely.
Start on shorter grass or on the section of lawn that has
already been mowed; correct the cutting height.
Clean the discharge channel and housing.
Correct the cutting height.
Contact an AL-KO service centre or authorised specialist
company and have the cutting blade sharpened/replaced.
Allow the lawn to dry.
Clean the grid of the grass collector.
Clean the discharge channel or housing.
Correct the cutting height.
Contact an AL-KO service centre or authorised specialist
company and have the cutting blade sharpened/replaced.
GB
20