Warning And Safety Instructions - Amann Girrbach ceramill base Bedienungsanleitung

Ceramill Base_RZ.indd 20
!
WarnIng anD saFety
InstrUctIons:
Ceramill Base was developed for use in the dental
industry. Commissioning and operation must be
performed precisely according to the instructions
for use. The manufacture accepts no liability for
damage caused by inappropriate use or improper
handling. Furthermore, the operator is obliged to
check the machine before using it. The operator
himself is responsible for checking that the
machine is suitable and fit for use for the desi-
gnated purposes, insofar as these purposes are
not specified in the instructions for use.
All repairs and/or servicing jobs, apart from those
described under Maintenance/care, may only be
carried out by the manufacturer or authorised
service providers.
_ only use original amanngirrbach
accessories and spare parts!
_ When milling, personal protective clothing
(goggles etc.) must be worn!
_ People with long hair must tie it back or
wear a hair net when milling.
_ Do not reach into the rotating tool when it
is operating or running down to a standstill
(risk of injury)!
_ remove miller/scanner from the handpieces
after use (risk of injury)!
_ always switch off the device when carrying
out maintenance work.
gB
20
17.12.2008 16:55:11 Uhr