Switching On The Appliance; Operating Tips; Selecting The Temperature; Refrigerator Compartment - Gaggenau rb 287 Gebrauchsanleitung

Switching on the appliance

Switch on the appliance with the main switch 8.
A warning signal sounds and alarm button 1 flashes.
Press alarm button 1 to switch off the warning signal.
The alarm button is lit and the temperature displays flash
until the appliance has reached the set temperatures.

Operating tips

While the refrigerating unit is running, beads of water
D
or hoarfrost form at the back of the refrigerator
compartment. This is quite normal. It is not necessary
to scrape off the frost or wipe off the beads of water.
The rear panel defrosts automatically. The conden
sation flows into the evaporation area of the
appliance via the condensation channels and
the drainage hole.
The fully automatic No Frost system keeps the freezer
D
compartment and refrigerator compartment free
of ice. Defrosting is not required.
The sides of the housing are sometimes heated
D
slightly. This prevents condensation in the area of
the door seal.
If you cannot open the freezer compartment door
D
immediately after closing it, wait 2-3 minutes until
the partial vacuum has equalised.

Selecting the temperature

Refrigerator compartment

(can be selected from +2 °C to +8 °C)
Keep pressing temperature selection button 6 until the
required refrigerator compartment temperature is set.
The value last selected is stored.
The set temperature is indicated on display 7.
We recommend a setting of +4 °C.
Perishable food should not be stored warmer than +4 °C.

Freezer compartment

(can be selected from -16 °C to -24 °C)
Keep pressing temperature selection button 3 until
the required freezer compartment temperature is set.
The value last selected is stored.
The set temperature is indicated on display 4.
We recommend a setting of -18 °C in the freezer
compartment.
29