Inhaltsverzeichnis
Werbung
Electrical connection
Do not use an extension lead or a multi plug socket.
The plug to secure the appliance must be freely acces
sible. Connect the appliance to a 220-240 V/50 Hz ac
current via a plug which has been properly installed.
The socket must be fused with a 10 A fuse or higher.
If the appliance is to be operated in a non European
country, check on the rating plate whether the indi
cated voltage and current type correspond to the
values of your mains supply. The rating plate is situ
ated in the bottom left hand side of the appliance.
Any necessary exchanging of the mains lead should
carried out by a specialist electrician.
!
Warning
Never connect the appliance to electronic energy
saver plugs or to power inverters which convert the
direct current to 230 V alternating current (e.g. solar
equipment, power supplies on ships).
Factory settings
Upon leaving the factory, the appliance has been
supplied with the following settings:
-
Fascia language:
-
Temperature unit:
-
Freezer space temperature:
Note
The factory settings (language, temperature unit) can
be changed in the setup mode.
English
°C
-18 °C
Switching on the appliance
Press the On/Off button
D
The appliance starts to cool down when switched on for
the first time. When the door is opened, the interior light
comes on.
Note
The preset temperatures (factory settings) are reached
after approx. 2-8 hours. Do not put any food in the
appliance beforehand.
To change the set temperatures > see Setting the
temperature".
Selecting the temperature
The temperature can be set from -16 °C to -24 °C.
We recommend a setting of -18 °C.
F
18
17
16
The temperature setting can be changed using the
+ (warmer) or (cooler) setting buttons. The temperature
can be set at 1 °C intervals.
To set the temperature:
Active the setup mode using the
D
The
symbol is displayed.
F
Set the desired temperature using the + (warmer) or
D
- (cooler) setting buttons.
O
.
or
buttons.
(
)
41
Werbung
Kapitel
Inhaltsverzeichnis
