Hearing Aid Compatible; Troubleshooting; Care And Maintenance - Doro Comfort 3005 Bedienungsanleitung

Selecting headset or hands free mode
Select headset-/handsfree mode by setting the switch = /
Note! On delivery, the phone is set to handsfree mode. The handsfree function will not work when
the headset function is activated and vice versa.

Hearing Aid Compatible

This phone is hearing aid compatible. Select the T-mode on your hearing aid to enable this
feature.

Troubleshooting

Check that the telephone cord is undamaged and properly plugged in. Disconnect any additional
equipment, extension cords and other phones. If the problem is resolved, the fault is with some
other equipment.
Test the equipment on a known working line (e.g. at a neighbour's house). If the equipment works
there the fault is probably with your telephone line. Please inform your network operator.
The answering machine does not respond to remote access
• Check that you are using a tone dial telephone.
• Try holding the keys down longer, approximately 1 second per digit.
The answering machine is not answering
• Memory may be full. Delete old messages.
• Check that the adapter/phone cord is connected correctly.
• Check that the answering machine function is turned on.
If the telephone still does not work, please contact the place of purchase for service. Don't forget
the receipt or a copy of the invoice.

Care and Maintenance

CAUTION
Only use batteries, mains adapter and accessories approved for use with this particular model.
Connecting other accessories may be dangerous and may invalidate the phone's type approval
and guarantee. The mains adapter is the disconnect device between the product and mains
power. The mains socket outlet must be close to the equipment and easily accessible.
Your unit is a technically advanced product and should be treated with the greatest care. Negli-
gence may void the warranty.
•
Protect the unit from moisture. Rain/snowfall, moisture and all types of liquid can contain
substances that corrode the electronic circuits. If the unit gets wet, you should disconnect it,
remove the battery and allow the unit to dry completely before you replace it.
• Do not use or keep the unit in dusty, dirty environments. The unit's moving parts and elec-
tronic components can be damaged.
•
Do not keep the unit in warm places. High temperatures can reduce the lifespan for elec-
tronic equipment, damage batteries and distort or melt certain plastics.
•
Do not keep the unit in cold places. When the unit warms up to normal temperature, conden-
sation can form on the inside which can damage the electronic circuits.
• Do not try to open the unit in any other way than that which is indicated here.
• Do not drop the unit. Do not knock or shake it either. If it is treated roughly the circuits and
precision mechanics can be broken.
English
on the back of the phone.
11