Technical Data; Safety Instructions - FLORABEST FRTA 20 A1 Originalbetriebsanleitung

GB

Technical data

Cordless Grass Trimmer .FRTA 20 A1
Motor voltage (U) ..................... 20 V
Idling speed ...............8000 min
Protection Class ............................... III
Protection category ...................... IP20
Runtime ..........................max. 45 min*
Cutting circle ..........................250 mm
Weight (without battery charger) 2.15 kg
Sound pressure level
(L ) ............... 78.6 dB (A), K
pA
Sound power level (L
guaranteed ....................... 96 dB (A)
measured .. 89.8 dB (A); K
Vibration (a )
h
upper handle . 2.65 m/s
additional
handle .......... 3.11 m/s
Battery (Li-Ion) ............... FAP 20 A1
Nominal voltage ...................... 20 V
Capacity ..................................2.0 Ah
Charging time ................... approx. 1 h
Charger .......................PLCP-007 A
Nominal consumption ................. 65 W
Uptake voltage/
Input ..................... 230-240 V~, 50 Hz
Voltage output/
Output .......................21.5 V
Protection class ............................
Protection category ...................... IP20
* The actual runtime under load of a fully char-
ged battery depends on how you work and on
the load put on the trimmer during operation.
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity. The vibration and noise meas-
uring processes in accordance with EN
50636-2-91, were completed successfully.
6
(rpm)
-1
= 3 dB
pA
)
WA
=2.51 dB
WA
; K=1.5 m/s
2
; K=1.5 m/s
2
, 2.4 A
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
Technical and optical changes may be
undertaken in the course of further devel-
opment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
2
The stated vibration emission value may
also be used for a preliminary exposure
2
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
usage conditions (all parts of the
operating cycle are to be consid-
II ered, including, for example, times
during which the power tool is
turned off and times when the tool
is turned on but is running idle).

Safety instructions

Ensure that the safety instructions
are observed when operating the
trimmer.