Aventics CMS, B-Design Betriebsanleitung Seite 108

108 AVENTICS | DeviceNet | R499050019–BDL–001–AD
Commissioning and Operation
Table 14: Assignment of the S4, S5, and S6 switches
Switches
S4
S5
S6
S6
A
B
Fig. 9: S4, S5, and S6 switches for assigning valve supply voltages
(U , U
Q1
This switch allows valves to be assigned in groups to supply
voltages U and U
Q1
When delivered, all valves are assigned to the U
Subbase positions for double
solenoid valves (solenoids 12, 14)
0 1 – 4
1 5 – 8
2 9 – 12
2 9 – 12
3 13 – 16
When delivered, switches S4 to S6 are in the U
Voltage at switches
Switches can be damaged if voltage is applied during operation.
O
Always operate switches in a voltage-free state!
How to assign the valve supply:
1. Open the lower screw cap B (see Fig. 9 on page 108).
2. Using the S4, S5, and S6 switches, assign each valve group
to one of the supply voltages U
Fig. 9 on page 108).
X71
X72
X10
)
Q2
.
Q2
NOTICE
ON OF F
S8
U
Q1
U
Q2
S4 S5 S6
voltage.
Q1
Subbase positions for single
solenoid valves (solenoid 14)
1 – 8
09 – 16
17 – 24
17 – 24
25 – 32
Q1
or U (see Tab. 14 and
Q1 Q2
position.