Useful Adjustment Settings; Image Position (Av Mode Only); Noise Reduction (Nr) (Av Mode Only) - Pioneer PDP-503HDE Bedienungsanleitung

Useful adjustment settings

MENU
MENU
Option
Position
H-Pos. [0]
V-Pos. [0]
Reset
RETURN
MENU
Option
NR
Off
High
Low
47
PDP-503HDE/(E)-e
ENTER
/ / /
–15 +15
–60 +60
[High]
47

Image position (AV mode only)

For adjusting a picture's horizontal and vertical
position.
1
Press MENU.
2
Press / to select "Option", and then press
ENTER.
3
Press / to select "Position", and then press
ENTER.
4
Press / to select "H-Pos." or "V-Pos.".
5
Press / to adjust the item to your desired
position.
6
Press MENU to exit the menu.
A
• For resetting all adjustment items set to the factory preset
values,
1 Press / to select "Reset", and then press ENTER.
2 Press / to select "Yes", and then press ENTER.
• Return to the previous menu by pressing n.
• Adjustments are stored separately according to input
source.
• Image position returns to the factory preset value when
"H-Pos." or "V-Pos." value is adjusted. (See page 22.)
Selected item Description
Centres the image by moving it to the left or
H-Pos.
right.
Centres the image by moving it up or down.
V-Pos.

Noise reduction (NR) (AV mode only)

The noise of the picture can be reduced by the NR
function.
1
Press MENU.
2
Press / to select "Option", and then press
ENTER.
3
Press / to select "NR", and then press ENTER.
4
Press / to select the desired level, and then
press ENTER.
5
Press MENU to exit the menu.
A
• Return to the previous menu by pressing n.
• The NR setting functions during 480i, 580i, and 480p input.
It cannot be selected during 1080i and 720p input.
• The NR setting is recorded for each INPUT SOURCE (TV,
INPUT1 to 4).
8/31/02, 5:40 PM