MTD Cub Cadet 2000 Serie Bedienungsanleitung Seite 21

2ZQHU V *XLGH Ò &XE &DGHW 6HULH 
Quick-reference help guide
Fault
Difficulty starting the
engine
The engine does not run
smoothly or splutters
Brake does not grip
Strong vibration
Switch off the unit
immediately
Possible cause
Tank empty
Fuel line or carburettor
blocked
Fuel filter blocked
Engine is flooded
Spark plug dirty
Battery does not give
current
Safety lock feature is not
operational
Engine not in tune
The ignition spark does not
occur
Carburettor incorrectly set
Oil level is too low when the
engine is running
Air filter is very dirty
Supply of air to the engine is
insufficient
The brake setting is no
longer correct or the brake
pads are worn out
Damaged blade shaft or
defective blades
Action
Fill the fuel tank
(see handbook for engine).
Clean the fuel line and the
carburettor (see handbook for
engine)
Clean or replace the fuel filter
(see handbook for engine).
See the subsection "Starting the
engine" (section "Operating the
Tractor").
Clean or replace the spark plug
(see handbook for engine).
Check battery, recharge or replace.
See the information titled "Safety
lock feature" and the subsection
titled "Starting the engine" (section
"Operating the Tractor").
Have the engine tuned.
Check the spark plug and the wiring
(see handbook for engine).
Reset the carburettor
(see handbook for engine).
Switch off the engine and have this
checked (see handbook for engine)
Clean or replace the air filter (see
handbook for engine).
Remove grass and chaff from the
radiator grill and the side covering
(see "Cleaning").
Switch off the engine and have the
brake settings checked.
Have defective parts replaced in a
specialist workshop.
(QJOLVK
To be done by
Operator
Service
Service/Operator
Operator
Service/Operator
Service
Operator
Service
Service
Service
Service
Service
Operator
Service
Service