Product Configuration; Cooling Fan; Cooling Unit - GYS TITANIUM 400 AC/DC Bedienungsanleitung

TITANIUM 400 AC/DC
REMOTE CONTROL
The analog remote control operates in TIG and MMA processes.
G
F
A
E
D C
ref. 045699 External view
Connection:
1- Plug the remote control into the connection at the back of the machine.
2- The HMI detects the presence of a remote control and offers a selection choice accessible by wheel.
Connection:
The TIG is equipped with a female socket for a remote control.
The specific 7 pin male plug (option ref.045699) enables connection to the different types of manual remote control or foot pedal. For the cabling
layout, please see the diagram below.
REMOTE CONTROL TYPE
Foot pedal
CONNECT-5
Operating :
• Manual remote control (option ref. 045675) :
The remote control enables the variation of current from 50% to 100% of the set intensity In this configuration, all modes and functions of the
machine are accessible and can be set.
• Foot pedal (option ref. 045682) :
The pedal control enables variation of the current from the minimum current to 100% of the set intensity.
In TIG, the welding machine only operates in 2T mode. The upslope and downslope are not automatically managed by the current source, and are
controlled by the user with the foot pedal.
The digital remote control allows to connect a remote HMI or a TIG dispenser.

COOLING FAN

To minimise sound and dust aspiration, the station integrates a controlled fan system. The fan's rotation speed depends on the temperature and the
machine's settings.
ENERGY MODE
This mode developed for welding with energy control framed by a DMOS allows, in addition to the energy display of the bead after welding, to set:
- The thermal coefficient according to the standard used: 1 for ASME standards and 0.6 (TIG) or 0.8 (MMA) for European standards. The energy
displayed is calculated taking this coefficient into account.
- The length of the weld seam (OFF - mm): if a length is recorded, then the energy display is no longer in joule, but in joule / mm (the unit on the
display «J» flashes).

COOLING UNIT

P 1L/min = 1000 W
Capacity = 5 L
U1 = 400 V +/- 15%
WCU1kW_C
The cooling unit is automatically detected by the machine. In the «Settings» menu / Cooling unit: the cooling unit can be disabled.
The protections supported by the cooling unit to ensure the protection of the torch and the user are:
• Minimum coolant level.
• Minimum flow rate of coolant flowing through the torch.
• Thermal protection of the coolant.
42
D
045682
B
C
B
045675
A
Electric diagram according to the remote control type.
Wire description
10 V
Manual remote control Cursor
Common/Earth
Switch
AUTO-DETECT
ARC ON
REG I
The cooling unit is controlled in 400 V +/-15%.
EN
Make sure that the cooling unit is turned off before disconnecting the inlet and outlet hoses for torch liquid.
The coolant is harmful and irritates the eyes, the mucous membranes and the skin. Hot liquid may cause burns.

PRODUCT CONFIGURATION

INFORMATION
This menu provides access to the version numbers of the cards and software.
Pin
A
B
C
D
E
F
G
PROCESS
This menu allows you to choose the welding process: TIG or MMA (SMAW)
SETTINGS
This menu allows you to set:
The display mode gives access to more or less welding parameters and configurations.
- Easy: Display and reduced functionality (supported process: MMA, TIG DC or AC Standard and Spot).
- Expert: Full display and all processes are supported.
The name of the device and the possibility of customizing it.
Supported languages: FR, UK.....
The Units of Measurement: International (SI) or Imperial (USA).
The time and its format.
Screen contrast
TITANIUM 400 AC/DC EN
43