Communication; Snmp Monitoring Slot; Epo Connector; Rs-232 Port - Tripp Lite SmartOnline S3MX Serie Bedienungsanleitung

5. Communication

5.1 Smart Monitoring Slot: SNMP Monitoring using the WEBCARDLX card or
Contact Closure Mangement using RELAYCARDSV (Optional cards)
Install an optional WEBCARDLX card in this slot to remotely monitor and control the UPS via a network. The RELAYCARDSV may also be
inserted in this slot to provide dry contact communication functionality. Refer to the WEBCARDLX and RELAYCARDSV manuals at
www.tripplite.com for further details.
Note: Only one card may be used at a time.

5.2 EPO Connector

The EPO is included as standard for site safety. Its default setting is Normally Closed (N.C.), with pins 1 and 2 closed for normal UPS
operation. To enable EPO function, open contacts with pins 1 and 2.

5.3 RS-232 Port

The RS-232 port is built into the UPS system's rear panel (S3M30KX and S3M40KX models) or behind the front door (S3M60KX and
S3M80KX models) to provide service support when upgrading the UPS system software.

5.4 USB Port

This port is for service purposes only.
S3M30KX and S3M40KX Models
S3M60KX and S3M80KX Models
34