How To Connect/Remove External Dust Extraction; Operation; Switching On/Off; Practical Tips - Parkside PHS 160 E5 Originalbetriebsanleitung

GB MT
Removing the dust collection
box:
4. Press the release button (4) and
pull the dust collection box (8) out.
Emptying the dust collection box:
5. Pull the tab (7) and remove the
dust collection box lid (6).
6. To empty, simply shake or knock
out the dust collection box (8).
7. Then close the dust collection
box (8) again.
Empty the dust collection box regu-
larly to ensure optimal suction.
How to connect/remove
external dust extraction
Connecting external dust
extraction
1. Push the external dust extraction
adaptor (11) as far as it will go
on the dust extraction connector
(9).
2. Connect the extraction hose from
a vacuum cleaner (sold separate-
ly) to the external dust extraction
adaptor (11).
Removing external dust extraction
1. Remove the extraction hose
from the external dust extraction
adaptor (11).
2. Disconnect the adapter for exter-
nal dust extraction (11).
If necessary, you can connect the
suction tube of a vacuum cleaner
directly to the device without an
adapter.
56

Operation

Switching on/off

Make sure that the power supply
voltage matches the voltage rat-
ing indicated on the device's type
plate.
Connect the machine to the power
supply.
1. To switch on, lick the on/off
switch (1) to position
tool will power on.
2. To switch off, lick the on/off
switch (1) to position
tool will power off.

Practical tips

When working with the ap-
pliance, always wear suita-
ble clothing and appropriate
protective equipment.
Prior to each use it must be
ensured that the appliance is
working correctly.
Personal protective equip-
ment and a fully functional
appliance reduce the risk of
injuries and accidents.
Do not use the device without a
dust collection box or external dust
extraction. Use of a dust extraction
can reduce hazards caused by
dust.
When using sanding sheets without
ventilation holes, dust extraction
is not possible. Make sure that the
workplace is well ventilated.
„I". The
„0". The