EVA Stampaggi ARIA 50 Bedienungshandbuch Seite 73

04. PRODUCT USE
Menu 04 - stand-by mode
Activates the "STAND-BY" mode that switches the appliance off after the room temperature has been higher than SET after the time defined
by a pre-set parameter, or when the external thermostat is satisfied.
After switching off after this condition, restarting will only be possible when the following condition is verified: the actual room temperature is
lower than the set one, after which the appliance will switch on automatically once the pre-set time has elapsed.
Menu 05 - buzzer mode
Set it to "OFF" to disable the buzzer.
Menu 06 – initial load
This function is important if the product is new, or if it is switched off due to insufficient pellets in the tank.
INITIAL IGNITION MUST BE PERFORMED BY AUTHORISED PERSONNEL ONLY, NOT BY THE PURCHASER.
CONTACT THE SERVICE CENTER THAT WILL SEND OUT A SPECIALIST TECHNICIAN TO YOU.
It allows a pellet preload to be carried out for a predefined time when the product is switched off and cold. Press P1 button to start and P4
button to stop. The initial load is only enabled if the appliance is in the Off state.
Menu 07 - Stove condition
It displays the instant status of the appliance reporting the status of the various devices connected to it. A few examples are included in the
following pages. You will see: Time of the states, including switching off, work, etc., pellet load and power, the fume temperature and the fume
motor rpm.
Menu 08 - Technical settings
Menu only for technicians and installers.
71