Product Use; Electronics With 6-Button Lcd Display; Power Off - EVA Stampaggi ARIA 50 Bedienungshandbuch

04.1 ELECTRONICS WITH 6-BUTTON LCD DISPLAY

Proper functioning and control adjustment devices
Control panel
The console displays information on the status of the product. Several types of data can be displayed and the settings available according to
the access level can be modified by entering the menu.
Depending on the selected mode and on their position on the display, the data visualised may acquire different meanings.
The meaning of the status indicators on the left side of the display.
Active chronothermostat
Active ignition spark plug
Active auger tube
Active fume fan
Active ambient ventilation
Active pump
Alarm
Activation in the display of one of the segments in the "status" area indicates activation of the corresponding device.
Description of Panel
BUTTON 1 (P1) - Temperature increase:
When in programming mode, use this button to modify/increase the selected menu value. When in working/switched off mode, use instead this
button to increase the stove temperature value.
Keeping the P1 Button pressed displays the pellet loading seconds and the actual power of the stove.
BUTTON 2 (P2) - Temperature decrease:
When in programming mode, use this button to modify/decrease the selected menu value. When in working mode/switched off, use instead
this button to decrease the room thermostat temperature value.
Holding Button P2 displays the fume temperature and the fume motor revolutions.
BUTTON 3 (P3) - Set/menu:
The button allows access to the user and technical parameters menu. After entering the menu, use this button to access the next sub-menu or
set the value and move to the next menu item when in programming mode.
BUTTON 4 (P4) - ON/OFF Unlocking:
Hold this button down for two seconds to manually switch the stove on or off respectively depending on its initial status (switched on or off).
Should there by any alarms that have blocked the stove, press this button to release it and subsequently to switch it off. After entering the menu
or during the programming phase, use this button to access the upper menu level. Any change is automatically saved.
BUTTON 5 (P5) - Heat output decrease:
When in working mode, use this button to decrease the heat output value. In menu mode, use this button to move to the next menu item or, in
programming mode, to go back to the subsequent sub-menu item. Any change is automatically saved.
Keeping the button P5 pressed displays the times of the various phases of the stove.
BUTTON 6 (P6) - Heat output increase:
When in working mode, use this button to modify the exchanger speed. In menu mode, use this button to go back to the previous menu item
or, in programming mode, to go back to the previous sub-menu item. Any change is automatically saved.

04. PRODUCT USE

10:56
C C
18.5 ° 25 °

POWER OFF

69