Inhaltsverzeichnis
Werbung
6. When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator flash for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
7. When cooking timer expires, the corresponding
cooking zone will be switch off automatically.
Other cooking zone will keep operating if they are turned on previously.
If the timer is set on more than one zone:
1. When you set the time for several cooking zones simultaneously, decimal
dots of the relevant cooking zones are on. The minute display shows the
min. timer. The dot of the corresponding zone flashes.
2. Once the countdown timer expires, the corresponding zone will switch off.
Then it will show the new min. timer and the dot of corresponding zone will
flash.
• Touch the heating zone selection control, the corresponding timer will be
shown in the timer indicator.
EN-19
(set to 15 minutes)
(set to 45 minutes)
Werbung
Inhaltsverzeichnis
