Modifying The Appliance - Orved evox 25 Bedienungs- Und Wartungsanleitung

• Remove and/or immediately replace loose connections or burnt wires (only qualified per-
sonnel must replace these parts).
• Replace the power supply cable if damaged. Only qualified personnel must replace this part.
• Use only suitable plugs and sockets that comply with the electrical specifications stipulated
on the identification plate of the machine.
• Do not insert objects in the vents of the machine: risk of electric shock!
• It is strictly prohibited to use running water, water jets and/or vapour in the machine instal-
lation area: risk of electric shock!
hAZARDS DERIVING FROM ThE PRESENCE OF hEATING
ELEMENTS (SEALING bARS)
DANGER!
• Risk of scalding: do not touch the sealing bar at the end of the work cycle.

MODIFyING ThE APPLIANCE

DANGER!
• Do not alter the machine in any way without approval from Orved S.p.A.
• Immediately replace all deteriorated, worn or damaged parts (qualified per-
sonnel must replace these parts).
• Only original spare parts are to be used.
FIRE PREVENTION
DANGER!
• Keep the vents free from obstacles (at least 10 cm away from any surrounding
obstacle).
• Do not place the machine close to flammable products
DANGER!
• Risk of burns: ventilate the environment if alcohol-based or flammable disin-
fectants are used. Keep open flames away from the machine! Do not smoke!
Rev. 02 - 05/2016 - Cod. 1500015 - Instruction manual for vacuum chamber packaging machines EVOX 25 / EVOX 25 H
3